SUS 321 Material Stainless Steel Wire Mesh
Product DescriptionGrade : 301 ,302 ,304 ,304L ,316 ,316L ,310 ,310S ,321
Diameter : 0.018mm-6mm
Mesh : mesh 1 -mesh 635
Condition : soft and hard
Surface : bright or foggy
Weaving Type :
plain wave : Plain weave can be woven from 1X1mesh to 635X635 mesh
twill weave : Twill weave can be woven from 20x250mesh to400X2800mesh
dutch weave : Plain Dutch weave can be woven from 10X64mesh to 80X700mesh
1. Plain Weave: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves. In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern. Each weft thread crosses the warp threads by going over one, then under the next, and so on. The next weft thread goes under the warp threads that its neighbor went over, and vice versa.
2. Twill Weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction.
3. Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size.
4. Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size.
5. Reversed Dutch Weave: difference from standard Dutch weave lies in the thicker warp wires and less weft wires.
Application:
widely used in aerospace, petroleum, chemical industry
scientific research and transportation industries
electroplating industry for pickling mesh, printing mesh
battery industry and a variety of sophisticated filtration products
Packing : Inside with water-proof paper, outside with plastic, then load in wooden case or as customers' requirement.
| Stainless Steel Woven Wire Mesh |
| Mesh/Inch | Wire Diameter | Aperture | Open Area | Weight(LB)/ 100 Square Foot |
| Inch | MM | Inch | MM |
| 1*1 | 0.0800 | 2.0300 | 0.920 | 23.3700 | 84.6 | 41.10 |
| 2*2 | 0.0630 | 1.6000 | 0.4370 | 11.1000 | 76.4 | 51.20 |
| 3*3 | 0.0540 | 1.3700 | 0.2790 | 7.0900 | 70.1 | 56.70 |
| 4*4 | 0.0630 | 1.6000 | 0.1870 | 4.7500 | 56.0 | 104.80 |
| 4*4 | 0.0470 | 1.1900 | 0.2030 | 5.1600 | 65.9 | 57.60 |
| 5*5 | 0.0410 | 1.0400 | 0.1590 | 4.0400 | 63.2 | 54.90 |
| 6*6 | 0.0350 | 0.8900 | 0.1320 | 3.3500 | 62.7 | 48.10 |
| 8*8 | 0.0280 | 0.7100 | 0.0970 | 2.4600 | 60.2 | 41.10 |
| 10*10 | 0.0250 | 0.6400 | 0.0750 | 1.9100 | 56.3 | 41.20 |
| 10*10 | 0.0200 | 0.5100 | 0.0800 | 2.0300 | 64.0 | 26.10 |
| 12*12 | 0.0230 | 0.5840 | 0.0600 | 1.5200 | 51.8 | 42.20 |
| 12*12 | 0.0200 | 0.5080 | 0.0630 | 1.6000 | 57.2 | 31.60 |
| 14*14 | 0.0230 | 0.5840 | 0.0480 | 1.2200 | 45.2 | 49.80 |
| 14*14 | 0.0200 | 0.5080 | 0.0510 | 1.3000 | 51.0 | 37.20 |
| 16*16 | 0.0180 | 0.4570 | 0.0445 | 1.1300 | 50.7 | 34.50 |
| 18*18 | 0.0170 | 0.4320 | 0.0386 | 0.9800 | 48.3 | 34.80 |
| 20*20 | 0.0200 | 0.5080 | 0.0300 | 0.7600 | 36.0 | 55.20 |
| 20*20 | 0.0160 | 0.4060 | 0.0340 | 0.8600 | 46.2 | 34.40 |
| 24*24 | 0.0140 | 0.3560 | 0.0277 | 0.7000 | 44.2 | 31.80 |
| 30*30 | 0.0130 | 0.3300 | 0.0203 | 0.5200 | 37.1 | 34.80 |
| 30*30 | 0.0120 | 0.3050 | 0.0213 | 0.5400 | 40.8 | 29.40 |
| 30*30 | 0.0090 | 0.2290 | 0.0243 | 0.6200 | 53.1 | 16.10 |
| 35*35 | 0.0110 | 0.2790 | 0.0176 | 0.4500 | 37.9 | 29.00 |
| 40*40 | 0.0100 | 0.2540 | 0.0150 | 0.3800 | 36.0 | 27.60 |
| 50*50 | 0.0090 | 0.2290 | 0.0110 | 0.2800 | 30.3 | 28.40 |
| 50*50 | 0.0080 | 0.2030 | 0.0120 | 0.3100 | 36.0 | 22.10 |
| 60*60 | 0.0075 | 0.1910 | 0.0092 | 0.2300 | 30.5 | 23.70 |
| 60*60 | 0.0070 | 0.1780 | 0.0097 | 0.2500 | 33.9 | 20.40 |
| 70*70 | 0.0065 | 0.1650 | 0.0078 | 0.2000 | 29.8 | 20.80 |
| 80*80 | 0.0065 | 0.1650 | 0.0060 | 0.1500 | 23.0 | 23.20 |
| 80*80 | 0.0055 | 0.1400 | 0.0070 | 0.1800 | 31.4 | 16.90 |
| 90*90 | 0.0050 | 0.1270 | 0.0061 | 0.1600 | 30.1 | 15.80 |
| 100*100 | 0.0045 | 0.1140 | 0.0055 | 0.1400 | 30.3 | 14.20 |
| 100*100 | 0.0040 | 0.1020 | 0.0060 | 0.1500 | 36.0 | 11.00 |
| 100*100 | 0.0035 | 0.0890 | 0.0065 | 0.1700 | 42.3 | 8.30 |
| 110*110 | 0.0040 | 0.1016 | 0.0051 | 0.1295 | 30.7 | 12.40 |
| 120*120 | 0.0037 | 0.0940 | 0.0064 | 0.1168 | 30.7 | 11.60 |
| 150*150 | 0.0026 | 0.0660 | 0.0041 | 0.1041 | 37.4 | 7.10 |
| 160*160 | 0.0025 | 0.0635 | 0.0038 | 0.0965 | 36.4 | 5.94 |
| 180*180 | 0.0023 | 0.0584 | 0.0033 | 0.0838 | 34.7 | 6.70 |
| 200*200 | 0.0021 | 0.0533 | 0.0029 | 0.0737 | 33.6 | 6.20 |
| 250*250 | 0.0016 | 0.0406 | 0.0024 | 0.0610 | 36.0 | 4.40 |
| 270*270 | 0.0016 | 0.0406 | 0.0021 | 0.0533 | 32.2 | 4.70 |
| 300*300 | 0.0051 | 0.0381 | 0.0018 | 0.0457 | 29.7 | 3.04 |
| 325*325 | 0.0014 | 0.0356 | 0.0017 | 0.0432 | 30.0 | 4.40 |
| 400*400 | 0.0010 | 0.0254 | 0.0015 | 0.3700 | 36.0 | 3.30 |
| 500*500 | 0.0010 | 0.0254 | 0.0010 | 0.0254 | 25.0 | 3.80 |
| 635*635 | 0.0008 | 0.0203 | 0.0008 | 0.0203 | 25.0 | 2.63
|
Processing products
Concentrating on putting all the efforts into maintaining product standards. We have a full range of production equipment, advanced technology, scientific management and inspection systems so that we can meet the exact requirements of our customers for various of wire mesh products.
About us
Product Tags:
|
|
Stainless Steel Wire Fabric (SS304, 304L, 316, 316L),Plain/Twill Weave Stainless Steel Wire Mesh Images
|
